Current Location:Home > Product Details>MSO5074F(G)Product Details


4 Channel Oscilloscope;
8 Channel Logic Analyzer;
25MHz Arb.Waveform Generator;
Large 7 inch 64K color Display, WVGA: 800*480.


  • 4 Channel Oscilloscope+8 Channel Logic Analyzer + 25MHz Arb. Waveform Generator(MSO5074FG).
  • Abundant Trigger type: Video, Edge, Slope, Pluse Width, Overtime, Alternative, Code-type, Duration, Queue, Repeat trigger.
  • Large 7 inch 64K color Display, WVGA: 800*480.
  • USB host and device connectivity, standard.
  • Ultrathin desigh, handy volume, easily portable.


  • 1Gsa/s Real Sample Rate;
  • 4 Channels Oscilloscope;
  • 70MHz Bandwidth, 1MRecord Length;
  • 32 automotive measurement and FFT Analysis for Simplified Waveform Abalysis.

Logic Analyzer

  • 8 Channles Logic Analyzer;
  • 500MHz Sample Rate
  • 1MRecord Length

Arb. Waveform Generator

  • 25MHz Arb. Waveform Generator Output(Sine wave up to 75MHz)
  • 200MSa/s Sample Rate;
  • 12bit Pattern Generator
  • 50MHz Frenquery Counter

Function Picture

Model MSO5074F MSO5074FG
Channel 4
Bandwidth 70MHz
Rise Time 5ns
Real time sample rate 1GSa/s
Record Length 1M
SEC/DIV Range 4ns/div~40s/div
Delay time Accuracy 500ps
A/D Converter 8bit resolution
Volts/div range 2mV/div~ 5V/div at input BNC
Position Range 20ns/div to 80us/div; (-8div x s/div) to 40ms;
200us/div to 40s/div; (-8div x s/div) to 400s;
DC Gain Accuracy ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div;
±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
Inputs Coupling AC, DC, GND
Inpits Impendance 1MΩ±2% 20pF±3pF
Probe Attenuation 1X, 10X
Trigger System
Trigger Types Edge, Video, Pulse, Slope, Over time, Alternative
Trigger Source CH1, CH2, EXT, EXT/5, AC Line
Trigger Modes Auto, Normal, Single
Coupling Type DC, AC, Noise Reject, HF Reject, LF Reject
Trigger Sensitivity
(Edge Trigger Type)
DC(CH1,CH2, CH3, CH4): 1div from DC to 10MHz;1.5div from 10MHz to Full;
DC(EXT): 200mV from DC to Full;
DC(EXT/5):1V from DC to Full;  
AC: Attenuates signals below 10Hz   
HF Reject: Attenuates signals above 80kHz
LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz
Trigger Level Range CH1, CH2, CH3, CH4: ±8 divisions from center of screen;
EXT: ±1.2V;
Trigger Level Accuracy( typical) signals having rise and fall times 20ns CH1, CH2, CH3, CH4: 0.2div × volts/div within ±4 divisions from center of screen;
EXT: ± (6% of setting + 40mV);
EXT/5: ± (6% of setting + 200mV);
Set Level to 50%(typical) Operates with input signals ≥50Hz
Cursor Measurement Manual: Voltage difference between cursors: V
             Time difference between cursors:
             Reciprocal of
T in Hertz (1/ΔT);
Tracing: The valtage and time at a waveform point;
Auto Measuerment Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH,  FRF
Math +, -, *, /, FFT
Logic Analyzer Specifications
Channels 8 Channels
Max. Input Impendence 200K(C=10p)
Input Voltage Range 0V~3V
Logic Threshold Range 0V~3V
Max. Sample Rate 500MSa/s
 Compatible Input TTL, CMOS, ECL
Sample Depth 1M
Edge Trigger D0-D7 select slope (rising or falling edge)
Pulse Width Trigger D0-D7 select pulse polarity (positive or negative pulse), trigger when (=, , >, <), trigger pulse width
Code-type Trigger D0-D15 select code-type (H, L, X)
Duration Trigger D0-D7 select persist time and trigger when (data terminate, data start, and data delay)
Queue Trigger D0-D7 select specific data index (0-3) and code-type (H, L, X)
Repeat Trigger D0-D7 select code-type (H, L, X) and repeat times
Arb. Waveform Generator Specifications (MSO5074FG)
Wave frequency DC~25MHz
DAC clock 2K~200MHz adjustable
Waveform Length 4KSa
Vertical Resolution 12 bit
Frequency stabilization <30ppm
Amplitude ±3.5V Max.
Output impedance 50 Ω
Output  current 50mA Ipeak=50mA
System Bandwidth 25M
Wave distortion -50dBc(1KHz),  -40dBc(10KHz)
Frequency area DC~50MHz
Input Amplitude   400mVpp~18Vpp
Coupling DC
Frequency precision ±Time Base Error ±1 Count
input impedance > 100KΩ
Pattern Generator 12Bit
General Feature
Supply Voltage 100-120VACRMS(±10%), 45Hz to 440Hz, CAT
120-240VACRMS(±10%), 45Hz to 66Hz, CAT
Power Consumption <30W
Display Type 7 inch 64K color TFT LCD,(WBGA 800*480)
Size & Weight 385*200 * 245(mm), 3.5kg