Thodukonics
Contact US
About Us
News
Download
Products
Products
Download
News
Solution
About Us
Contact US
Contact Us
Position:
Home
/
Products
Product Category
Spectrum Analyzer
HSA2016 Series
HSA2030 Series
Digital Storage Oscilloscope
DPO7000 Series
DSO2000 Series
DPO6004B(C)/MPO6004D Series
DPO6002B(C)/MPO6002D
DSO4004C Series
DSO4004B Series
DSO4000C Series
MSO5000D Series
DSO5000P Series
DSO5000B Series
DSO5000BM Series (Discontinued)
DSO5000BMV Series (Discontinued)
DPO8000 Series
Function/Arb. Waveform Generator
HDG6000B Series
HDG3000C Series
HDG3000B Series
Hantek1025G
DDS3X25
DDS3005
HDG1000A Series (Discontinued)
HDG2000B Series (Discontinued)
Battery tester
High-voltage Battery Tester HBT4000 Series
Battery Tester HBT4000 Series
High-voltage BatteryTester HBT3000 Series
Battery Tester HBT3000 Series
Digital Multimeters
HDM3065 Series
HDM3055 Series
Leeb Hardness Tester
HT360/HT360C
DC Power Supply
HDP4000 Series
HDP10000 Series
HT3323/HT3325
HT3000PG Series
HT3000PF Series
HT3000PE Series
HT3000PB Series
HT3000PA Series
Handheld Oscilloscope
TO1000 Series
Hantek2000 Series
DSO8000E Series
DSO1000E Series
DSO1000S Series
DSO8060 Series(Discontinued)
DSO1000 Series(Discontinued)
DSO1000B Series(Discontinued)
DSO1000BV Series (Discontinued)
LCR Meter
Hantek1832C/Hantek1833C
Multi-channel Temperature Detector
HTM200 Series Multi-channel Temperature Detector
PC USB Oscilloscope
Hantek6004EU Series
iDSO Series
Hantek6004BD Series
Hantek6004BC Series
PSO2020 USB Pen Storage Oscilloscope
Hantek1008A
DSO3000(A) Series (1GSa/s)
DSO3000 Series (200MSa/s)
Hantek6002BE Series
Hantek6022BL
DSO2000 Series
DSO-220USB/DSO-2100USB
Automotive Diagnostic Equipment
Hantek2D82AUTO
Automotive Battery Tester HT2018B\C
Hantek6074BE Series Kit
DSO3064 Kit VII
DSO3064 Kit V
DSO3064 Kit III
Hantek1008C
Hantek1008B
DSO5080A
PC USB Logic Analyzer
Hantek4032L
LA5034(discontinued)
Bluetooth/USB Data Logger
Hantek365A
Hantek365B
Hantek365C
Hantek365D
Hantek365E
Hantek365F
Process Calibrator
HT824 - Process Calibrator
Test Accessories
HT20COP Coil-on-Plug and Signal Probe
HT25COP Coil-on-Plug and Signal Probe
HT8000
Probe (PP80, PP90, PP150, PP200)
AC/DC Current Clamp CC-65
AC/DC Current Clamp CC-650
AC/DC Current Clamp CC-800
High-Voltage x100 Probe (T3100)
20:1 Attenuator (HT201)
Auto Ignition Probe (HT25)
Large Dolphin/Gator Clips (HT18A)
Multimeter Probe (HT19)
Auto Test Leads (HT30A)
Breakout Leads(HT301)
6-Way Breakout Leads (HT306)
Acupuncture Probe Set (HT307)
COP Extension Cord (HT308)
Auto Power Adapter (HT310)(Discontinued)
BNC to 4 mm Adapter (HT311)
LAN PCB (HT312)
Mini Test Hook( HT321)
BNC to BNC Cable (HT322)
Multimeter Probe (HT325)
Multimeter Banana Socket (HT326)
Multimeter Socket (HT323)
Commission Development (ODM/OEM)
Project Development
Secondary Development Contact US
AC power supply
USBXI Instruments
USBXI-1070 Series(Discontinued)
Product List
Test Accessories
Model
Unit
Use
Specification
Other
HT20COP Coil-on-Plug and Signal Probe
pc
HT20COP coil-on plug and signal probe can catch the ignition waveform of automobile engine easily.
Length 2.5m, BNC connector fits for normal oscilloscope
To avoid injury keep the probe away from moving parts, such as the alternator drive belt and cooling fans
HT25COP Coil-on-Plug and Signal Probe
N/A
HT25COP coil-on plug and signal probe can catch the ignition waveform of automobile engine easily.
Length 2.5m, BNC connector fits for normal oscilloscope
To avoid injury keep the probe away from moving parts, such as the alternator drive belt and cooling fans
HT8000
pc
Integral injection molding makes
the usage more flexible and
the oscilloscope able to adapt
more testing situations.
HT8050,HT8100
Universal
version.
Probe (PP80, PP90, PP150, PP200)
pc
Integral injection molding makes
the usage more flexible and
the oscilloscope able to adapt
more testing situations.
Attenuation ratio: 1× and 10×
optional. Input resistance:
1MΩ: 10MΩ
System bandwidth:
x1:DC-4MHz-80MHz;
x10: DC-60MHz-200MHz.
Universal
version.
AC/DC Current Clamp CC-65
pc
It is a transducer which allows
your multimeter to measure
current data and enable your
oscilloscope to measure
the current waveforms.
AC/DC Current Clamp,
20kHz Bandwidth
20mA to 65A DC
10mV/A
1mV/A
AC/DC Current Clamp CC-650
pc
It is a transducer which allows
your multimeter to measure
current data and enable your
oscilloscope to measure
the current waveforms.
AC/DC Current Clamp,
400Hz Bandwidth,
20mA to 650A DC
10mV/A
1mV/A
AC/DC Current Clamp CC-800
pc
It is a transducer which allows
your multimeter to measure
current data and enable your
oscilloscope to measure
the current waveforms.
AC/DC Current Clamp,
5KHz Bandwidth,
20mA to 800A DC.
10mV/A
1mV/A
High-Voltage x100 Probe (T3100)
pc
The T3100 probe is designed
as a strong, flexible and
reliable part for the oscilloscope
according to the human body
function.
Attenuation: 100:1;
Input Resistance: 100M ohm;
Bandwidth: DC-100MHz;
Input Voltage:2000VDC+ACpk
Universal
version
20:1 Attenuator (HT201)
pc
The HT201 has been designed
to allow fuel injector and primary
ignition waveforms to be
measured using Hantek
oscilloscopes.
Specification: Attenuation: 20:1
Bandwidth: 10MHz
Input Res: 1.053M
For vehicle
testing.
Auto Ignition Probe (HT25)
pc
Auto ignition probe is a kind of
inductive capacitance sensor,
it must match with an
oscilloscope.
Lead length 2.5 meters, the decay
of up to 10,000:1.
For vehicle
testing.
Large Dolphin/Gator Clips (HT18A)
pair
The dolphin/gator clips are fully
insulated with a 4 mm socket
in the handle, offering an easy
connection to the HT30A auto
test cable.
Length: 85 mm, Height: 38 mm
Depth: 16.5 mm
Clamping limit: 30 mm
Contents:1pc X Red Clip
1pc X Black Clip
Be able to
use with
HT30A.
Multimeter Probe (HT19)
pair
The multimeter probes offer
a quick and easy solution,
where a permanent connection
is not required.
Length: 131 mm Diameter: 10 mm
Contents:1pc X Red Probe,
1pc X Black Probe
Be able to
use with
HT30A and
HT307.
Auto Test Leads (HT30A)
pc
It's a special line for assisting
auto measurement instruments
to test various types of signals.
Test lead of a male BNC
connector to (2) 4mm connectors.
4mm connectors are coded
in two colors, black and red.
Lead length 30 meter.
For vehicle
testing.
Breakout Leads(HT301)
pc
This breakout lead is easy to
take voltage readings from
numerous sensors in vehicle
engine compartment.
Connect the breakout lead
plugs into the existing wire
loom, and insert the two 4mm
banana plugs into the scope
using test lead HT30A, the
output signal can be taken.
For vehicle
testing.
6-Way Breakout Leads (HT306)
set
The lead is easy to access the
existing automotive wiring
harness interface, convenient to
read all kinds of sensor signal.
The lead with 4 kinds of joint
size: 0.6mm, 1.5mm, 2.3mm
and 2.8 mm.
For vehicle
testing.
Acupuncture Probe Set (HT307)
set
This acupuncture probe is a
back pinning, piercing and
repairable probe.
Contents: 5pcs complete
acupuncture probes, 2pcs screws,
20pcs replacement needles.
With
replacement
needles.
COP Extension Cord (HT308)
set
Simple accessory that allow you
to take accurate secondary
ignition measurements on
COP ignition systems.
Designed to aid diagnostics on
secondary ignition circuits by
allowing an HT measurement to
be made when there are no,
or limited access, to any
spark plug leads.
For vehicle
testing.
Auto Power Adapter (HT310)(Discontinued)
pc
Power your oscilloscopes and
other electronic devices through
your vehicle's DC outlet with this
power adapter.
Input DC: 12-24VDC;
Output: 12V 1500mA
Cord Length: 1.45m.
Optional
car power
adapter and
cord for
oscilloscope.
BNC to 4 mm Adapter (HT311)
pc
The BNC to 4mm adapter
connects two 4mm banana
plugs to a BNC socket.
BNC Impedance: 50Ω
Voltage: 500V, Current: 3A Max.
Resistance: <0.8mΩ
Signal is
connected to
red terminal
LAN PCB (HT312)
pc
This board is factory installed on
oscilloscopes as an optional
interface and should require
no futher connections to be
made to it.
The LAN Interface PCB uses a
High Impedance Transceiver (HIT)
for signal transceiving in order to
utilize a bus topology on the LAN.
Optional
interface for
oscilloscope.
Mini Test Hook( HT321)
set
Set of 18 pcs mini test hooks
for logic analyzers and other
measuring instruments.
Hook connects to 1.65mm dia
wire or smaller.
Apply to
logic analyzer.
BNC to BNC Cable (HT322)
pc
It's an necessary interconnection
cable for general function and
signal generator applications.
1m BNC male to BNC male
cable; Frequency range:DC~1GHz;
Nominal impedance: 50Ω;
Coaxial cable.
Male BNC
connectors on
both ends.
Multimeter Probe (HT325)
pair
Meter probe with standard plug
(4mm), suitable for universal.
CATIII 1000V, double insulation;
Max. rated current: 16A ;
Content: 1pc x red probe,
1pc x black probe
Adapt for
all Hantek
handheld
oscilloscope.
Multimeter Banana Socket (HT326)
set
11.4mm multimeter banana plug
and socket, terminal test hole
and connector.
Set screw, high quality, 3 types
and many color available (red,
black, green, blue).
Accessory
for multimeter.
Multimeter Socket (HT323)
pair
The external multimeter socket
offer a quick and easy solution,
where a permanent connection
is not required.
Size: 11.4mm
Contents:
1pc x red socket
1pc x black socket
Accessory
for multimeter.